C went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? read_tsc: ACK! TSC went backward! Unsynced TSCs? Linux agpgart interface v0.101 (c) Dave Jones PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize libata version 1.20 loaded. sata_nv 0000:00:07.0: version 0.8 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 GSI 16 sharing vector 0xD9 and IRQ 16 ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 217 PCI: Setting latency timer of device 0000:00:07.0 to 64 ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xCC00 irq 217 ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xCC08 irq 217 ata1: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3c01 87:4023 88:407f ata1: dev 0 ATA-7, max UDMA/133, 488397168 sectors: LBA48 nv_sata: Primary device added ata1: dev 0 configured for UDMA/133 scsi0 : sata_nv nv_sata: Primary device removed nv_sata: Secondary device added nv_sata: Secondary device removed ata2: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3c01 87:4023 88:407f ata2: dev 0 ATA-7, max UDMA/133, 488397168 sectors: LBA48 nv_sata: Primary device added ata2: dev 0 configured for UDMA/133 scsi1 : sata_nv nv_sata: Primary device removed nv_sata: Secondary device added nv_sata: Secondary device removed Vendor: ATA Model: WDC WD2500KS-00M Rev: 02read_tsc: ACK! TSC went backward! Unsynced TSCs? .0 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: WDC WD2500KS-00M Rev: 02.0 Type: Direct-Access ANSI SCSI revision: 05 ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 GSI 17 sharing vector 0xE1 and IRQ 17 ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 225 PCI: Setting latency timer of device 0000:00:08.0 to 64 ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xB800 irq 225 ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xB808 irq 225 ata3: no device found (phy stat 00000000) scsi2 : sata_nv ata4: no device found (phy stat 00000000) scsi3 : sata_nv SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sda: drive cache: write back SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 < sda5 sda6 sda7 > sd 0:0:0:0: Attached scsi disk sda SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdb: drive cache: write back SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 > sd 1:0:0:0: Attached scsi disk sdb md: raid1 personality registered as nr 3 md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 32768 (order: 9, 2621440 bytes) TCP bind hash table entries: 32768 (order: 9, 2359296 bytes) TCP: Hash tables configured (established 32768 bind 32768) TCP reno registered input: AT Translated Set 2 keyboard as /class/input/input0 TCP bic registered NET: Registered protocol family 8 NET: Registered protocol family 20 read_tsc: ACK! TSC went backward! Unsynced TSCs? md: Autodetecting RAID arrays. Time: acpi_pm clocksource has been installed. md: autorun ... md: considering sdb8 ... md: adding sdb8 ... md: sdb5 has different UUID to sdb8 md: adding sda7 ... md: sda5 has different UUID to sdb8 md: created md1 md: bind md: bind md: running: raid1: raid set md1 active with 2 out of 2 mirrors md: considering sdb5 ... md: adding sdb5 ... md: adding sda5 ... md: created md0 md: bind md: bind md: running: raid1: raid set md0 active with 2 out of 2 mirrors md: ... autorun DONE. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. kjournald starting. Commit interval 5 seconds ***************************************************************************** * * * REMINDER, the following debugging option is turned on in your .config: * * * * CONFIG_LATENCY_TRACE * * * * it may increase runtime overhead and latencies. * * * ***************************************************************************** Freeing unused kernel memory: 228k freed NET: Registered protocol family 1 usbcore: registered new driver usbfs usbcore: registered new driver hub Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21 GSI 18 sharing vector 0xE9 and IRQ 18 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 21 (level, low) -> IRQ 233 i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00 i2c_adapter i2c-1: nForce2 SMBus adapter at 0x1c40 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: irq 233, io mem 0xfeb00000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20 GSI 19 sharing vector 0x32 and IRQ 19 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 20 (level, low) -> IRQ 50 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller mice: PS/2 mouse device common for all mice forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.48. ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 50, io mem 0xfebff000 usb 1-6: new high speed USB device using ehci_hcd and address 2 input: PC Speaker as /class/input/input1 FDC 0 is a post-1991 82077 parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] ieee1394: Initialized config rom entry `ip1394' usb 1-7: new high speed USB device using ehci_hcd and address 3 hub 2-0:1.0: USB hub found hub 2-0:1.0: 8 ports detected ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 217 PCI: Setting latency timer of device 0000:00:0a.0 to 64 eth0: forcedeth.c: subsystem: 010f1:2865 bound to 0000:00:0a.0 ohci1394: $Rev: 1313 $ Ben Collins ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 GSI 20 sharing vector 0x3A and IRQ 20 ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 58 PCI: Via IRQ fixup for 0000:01:06.0, from 11 to 10 NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 NFORCE-CK804: chipset revision 242 NFORCE-CK804: not 100% native mode: will probe irqs later NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[58] MMIO=[fdffe000-fdffe7ff] Max Packet=[2048] ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 58 Model 1006 Rev 00000000 Serial 10061102 tg3.c:v3.47 (Dec 28, 2005) ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 GSI 21 sharing vector 0x42 and IRQ 21 ACPI: PCI Interrupt 0000:04:00.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 66 PCI: Setting latency timer of device 0000:04:00.0 to 64 eth1: Tigon3 [partno(BCM95721) rev 4101 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:e0:81:56:ac:2e eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] eth1: dma_rwctrl[76180000] Probing IDE interface ide1... input: ImExPS/2 Generic Explorer Mouse as /class/input/input2 hdc: SONY DVD RW DRU-810A, ATAPI CD/DVD-ROM drive ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0810000236c61] ide1 at 0x170-0x177,0x376 on irq 15 Initializing USB Mass Storage driver... scsi4 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning scsi5 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning usbcore: registered new driver usb-storage USB Mass Storage support registered. hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 EXT3 FS on md0, internal journal Probing IDE interface ide0... eth1394: $Rev: 1312 $ Ben Collins eth1394: eth2: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) sbp2: $Rev: 1306 $ Ben Collins ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) ieee1394: sbp2: Try serialize_io=0 for better performance do_settimeofday() was called! Vendor: LEXAR Model: JUMPDRIVE SPORT Rev: 3000 Type: Direct-Access ANSI SCSI revision: 00 SCSI device sdc: 506880 512-byte hdwr sectors (260 MB) sdc: Write Protect is off sdc: Mode Sense: 43 00 00 00 sdc: assuming drive cache: write through Vendor: WD Model: 2500JB External Rev: 0602 Type: Direct-Access ANSI SCSI revision: 00 SCSI device sdc: 506880 512-byte hdwr sectors (260 MB) SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB) sdd: assuming drive cache: write through SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB) sdd: assuming drive cache: write through sdd:<5>sdc: Write Protect is off sdc: Mode Sense: 43 00 00 00 sdc: assuming drive cache: write through sdc: sdd1 sdd2 sd 4:0:0:0: Attached scsi disk sdd sdc1 sd 5:0:0:0: Attached scsi removable disk sdc usb-storage: device scan complete usb-storage: device scan complete do_settimeofday() was called! device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on md1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sdb6, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 2650684k swap on /dev/sda6. Priority:-1 extents:1 across:2650684k do_settimeofday() was called! NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver lp0: using parport0 (interrupt-driven). eth0: no IPv6 routers present check_periodic_interval: short interval! 49997269. bad calibration or timers may be broken. EXT3-fs warning: maximal mount count reached, running e2fsck is recommended kjournald starting. Commit interval 5 seconds EXT3 FS on sdd2, internal journal EXT3-fs: mounted filesystem with ordered data mode.